General Engineering Parts

Products Category

 

Xylem Water Solutions

SMC Pneumatics Product

Waterproofing Products

General Engineering

Boiler Products

Fiberglass Blanket Insulation

Fiberglass blanket insulation is the recommended product for ranges, broilers, oven panels, commercial ovens, fireplaces, solar collectors and incinerators. Fiberglass blanket insulation is for use in applications operating at temperatures up to 1000°F (538°C).

fibreglass blanket insulation

Fibreglass Pipe Insulation

Fibreglass SPI (Steam Pipe Insulation) is a rigid fibreglass faced with aluminium foil. It is available in a variety of wall thicknesses and used to thermally insulate steam and hot water that runs through your pipes.

fibreglass pipe insualtion

Fibreglass Cloth

Texturised continues filament glass textiles. Special finishing treatments available to meet particularly demanding use. suitable for fire blankets, welding curains, protective clothing and other applications requiring and incombustible and flexible cloth.

fibreglass cloth

Insulation Tape

Aluminum foil tape is an conductive tape designed to be used with the EcoFoil Ultra NT SCIF radiant barrier. Use this aluminum foil tape to seal the seams and the joints to create a solid radiant barrier surface. With the ability to stand up to heat compared to standard duct tape, this aluminum tape is heavy duty. It helps create a full barrier from heat. Get started on your latest project using this conductive aluminum foil tape as your go-to for all of your high strength foil tape needs.

  • Creates a complete seal as well as providing a continuous vapor barrier.
  • Seals seams and repairs tears and punctures.
Insulation Tape

Boiler Brush

Boiler Steel Spiral Brushes are available for cleaning 1/4 to 4-inch Outer Diameter tubes in heat exchangers, condensers, and chillers. Remember to match metals; steel brushes are for cleaning ferrous metals.

boiler brush

Boiler Cone Ring

A comprehensive range of cones and rings to suit all leading makes of water and tank level gauges.
Our standard cones and rubbers are manufactured in EPDM rubber, but other materials are available.

boiler cone ring

Boiler Gauge Glass

Plain saw cut ends as standard. End fusing available as optional

boiler gauge glass

Boiler Cement

SHIRACAST® 145 is a dense, low iron castable based on high purity chamotte and calcium aluminate cement. It is general purpose castable providing good wear resistance from its dense matrix. The comprehensive range of SHIRACAST dense castables covers the complete temperature spectrum up to 1850ºC. Four classes of product are offered; standard, abrasion resistant, gunning and extra-coarse aggregate. These products have been designed utilising different aggregates and cement binders to ensure they meet the requirements of most applications.

Manhole and Hanhole Gasket

These can be manufactured from GJ2 rubber fibreglass cloth or moulded rubber. Moulded rubber gaskets are suitable for boilers, water heaters and air tanks with pressure up to 1240 kpa and temperature to 190 Degree C.

manhole gasket

Packing Sleeve

Packing Sleeves are used in many brands of Gauge Cock, to prevent leakage and to ensure effective operation. Moncrieff Packing Sleeves are made from 99.5% pure graphite, with stainless steel eyelets, the computer controlled compression; ensure a standard, quality product.

Packing sleeve

Webbing Tape

Cotton made webbing tape and thus deliver webbing tapes which has rich matte finish, has good water absorptions capabilities, looks beautiful due to rich texture and finally is soft due to fine quality yarn used to fabricate the same. These tapes are primarily used in the Commercial, Recreational and Medical Industries.

webbing tape

Steam Products

Traps

Steam traps are a type of automatic valve that filters out condensate (i.e. condensed steam) and non-condensable gases such as air without letting steam escape. In industry, steam is used regularly for heating or as a driving force for mechanical power. Steam traps are used in such applications to ensure that steam is not wasted.

steam trap

Valves

Many different types of manual valves are used in industrial applications worldwide. The following article will cover the general mechanism and function of the most typical of these valves used in steam systems, such as ball valves, butterfly valves, globe valves, gate valves, and diaphragm valves.

steam valves

Relief Valves

The relief valve (RV) is a type of valve used to control or limit the pressure in a system or vessel which can build up by a process upset, instrument or equipment failure, or fire. The pressure is relieved by allowing the pressurised fluid to flow from an auxiliary passage out of the system.

relief valve

Lifting Materials

Chain Blocks – Electrical / Manual

The Chain Block, commonly known as a hand chain hoist or block and tackle, a chain hoist usually features top and bottom hooks, the static top hook is to suspend the hoist from a beam clamp or trolley, the bottom hook is the load hook, this is raised and lowered by simply pulling down on the hand chain, this then turns gears inside the hoisting unit to raise or lower the load. Both hooks feature safety catches to ensure that the load and the hoist is secure once suspended and lifting.

chain block

Lever Hoist

Compact, portable and extremely durable – level hoists are used effectively to pull, lift and position materials. These mighty hoists are ideal for construction sites, plant maintenance and industrial applications.

lever hoist

Web Slings – Flat / Round

This lifting sling makes raising heavy and cumbersome loads a breeze. The flexible-yet-tough nylon webbing on this lifting sling lifts up to 2000 lb. without marring polished metal surfaces. This is the perfect lifting strap for warehouses, mechanic shops and any industrial workplace that needs heavy objects moved.

web sling

Pallet Trolley

Hand Pallet Truck / Trolleys lifts are ideal storage aids for manual tasks over short distances. Safe, robust, durable, and at the same time very economical. The optimised hydraulic systems, ball bearing wheels, Teflon coated joints and proportioned lowering valve ensures quiet operation and safe maneuvering. Ideally suited for handling pallet loads up to 2500 kg.

pallet trolley

Beam Trolley – Electrical / Manual

Adjustable to fit standard or wide flange I-beam tracks, this beam trolley allows you to move up to 2000 lb. with a simple push! The dual wheels are designed for a straight or tapered beam track and work on both straight and curved tracks. Featuring a durable powder coat finish and pre-lubricated sealed bearings to withstand heavy use, this beam trolley is an ideal material handling tool for warehouses, garages and other industrial areas.

  • Adjustable to fit standard or wide flange I-beam track
  • Dual wheels are designed to fit straight or tapered beam track
  • Works on straight or curved track
  • Durable powder coat finish
  • Pre-lubricated sealed bearings for long life and reduced maintenance
beam trolley

Hooks

Chocker

Heavy Duty Forrestry Logging Choker Hook
8mm Clevis Forrestry Hook 2.00T WLL – 8.0T MBL
10mm Clevis Forrestry Hook 3.15T WLL – 12.6T MBL
13mm Clevis Forrestry Hook 5.30T WLL 21.2T MBL

chocker hook

Safety

Locking gates are designed so that the more weight is on the basket of the hook, the tighter the gate closes. Locking hooks can be used for lifting people, where most other hooks should not be used for lifting people.

safety hook

Grab

Grab hooks have a narrow throat, with a basket equal in size to the throat opening. Grab hooks are designed to grab on to chain links, with the throat opening at an upwards angle and the basket at the bottom. Grab hooks are used a lot in circus rigging, especially in connection with chains.

grab hook

Swivel

Hooks are made with a variety of swivels, ranging from common bearings (pictured), to ball bearings, to needle bearings, depending on the amount and quality of bearing needed. Generally, these start out as a welded shank hook, with the shank becoming the axle of the swivel.

swivel hook

Hammer Lock

Chain Connecting Links are commonly used to connect Head Rings, Chain, Hooks and other lifting components for Chain Slings and a wide variety of other uses.

hammer lock

Skidder Ring

Skidder rings are manufactured in a special high tensile alloy steel. These mainline rings feature a wide bale to decrease cable chafing.

skidder ring

Load Binder

This load binder uses fast ratchet action to secure and tie down large loads. The professional quality load binder is designed for maximum leverage. The heavy duty cam and pawl ratchet makes it faster and easier to tie down and re-secure big loads.

  • 15 in. lever with ratcheting action secures loads quickly
  • Locking mechanism
  • Rugged steel construction
load binder

Master Link

Lifting master links are joined to alloy steel chain slings using G-Link connectors, SK connectors, and BL connectors. Lifting master links are made using the most modern technology. The design is wider than many standard alloy steel master links to accommodate modern crane hooks. The additional width, especially in larger sizes, allows the fabricator to install thimbles for larger sized wire ropes used in bridle configurations. Primarily manufactured to support alloy steel chain sling fabrication, these links are very often used for wire rope slings.

master link

Shackles

Bow – Galvanised / Steel

A bow shackle looks similar to an anchor shackle except that the bowed part of the shackle is much larger than an anchor shackle. Some, however, will use the names interchangeably. These shackles have an almost rounded U – shape to them. The D shackle, on the other hand has straight legs with a rounded top.

bow shackle

Dee – Galvanised / Steel

The D shackle is limited a bit in the way it can handle a load. The small loop at the top can typically handle something heavy, but side loads or racking loads may bend D shackles. For this reason, they are most typically used in bidirectional load situations. Since the loop at the top of the shackle is rather small, the piece is typically capable of handling a significant weight, but always verify restrictions on a particular piece before use.

dee shackle

Pulley

Aluminium

The latest innovation in composite power transmission components from Fenner Drives. Fenner Drives Composite Driven V-Pulleys are high-strength, corrosion resistant, lightweight, and highly cost-effective.

alumnium pulley

Cast Iron

Pilot bore, taper bore Pulleys(SPA, SPB, SPC AND SPZ), adjustable pulleys, multi wedge pulleys.
V-belt pulley for taper bush, with solid hubs. Standard sheaves, taper bushes sheaves, AK, BK series sheaves. Variable pith sheaves, Europe type sheaves. Taper bushings.
Material: 45C. GG25, GGG40, Aluminium, etc.
Surface treatment: Black oxide, phosphate, painted or passavited.
With standardized desigh and well equipped CNC machining systerms. Our pulleys have high
Precision and good interchangeability. It has aready achieved the ISO-9001 Quality systerm evaluation.

cast iron pulley

Vee Belts

V belts, or Vee belts are endless power transmission belts. They have a trapezoidal cross section, fitting into a V-shaped groove. V belts transmit higher torque at less width and tension than a flat belt.

vee belt

Taper Lock Bush

The Taper Lock bush, also referred to as a Taper bush or Taper Fit bush, is a locking mechanism commonly used in Power Transmission Drives for locating pulleys, sprockets, and couplings to shafts. The Taper Lock bush is pre-bored and keyed to match the required shaft and keyway diameters. Two popular brands of bush include the Martin Taper Lock bush and the Fenner Taper Lock bush. The outside of the bush is tapered to match the component bore that is to be located on the shaft.

taper lock bush

Coupling / Elements

GBC / HRC
Rap / NM
MC
Tyre
GC Cone Ring

  • Semi elastic couplings for general purpose use. Available as F flange type, bush mounted from inside, and H flange bush, inserted from outside face. Taper Bush Fixing Allows Quick and Easy Assembly. Simple Alignment by Straight Edge, Accommodates Minor Misalignment, Wrench Clearance for Tightening Bush on Shaft is 29mm (size 70, 90) and 38mm (size 110, 130) – Use of Shortened Wrench will Reduce the Required Dimensions
    Standard Nitrile Rubber Insert, Temperature Range -40°C to +100°C.
  • Tyre Couplings are highly elastic, lubrication free couplings that tolerate large amounts of misalignment in all planes as well as offering simple installation and inspection without d
gbc coupling
rap coupling
mc coupling

Packing

Cork

Cork sheets are one of the most widely used agglomerated cork product. The standard size of a cork sheet is 3′ x 2′ and thickness ranges from 0.8 mm to 10 mm (and slabs up to 125mm). At Bharat Corrub, we also produce cork sheet in roll forms. These cork rolls can be manufactured from 0.8 mm to 6 mm thickness and width of 610 mm or 915 mm and even 1 meter. Cork sheets are available in different grades, textures, bondings, densities and even colour.

cork packing

Gland – Graphite / Non Graphite

Gland packing is used extensively for the sealing and restriction of leakage of the working fluid along the stem in valves and along the shaft in the case of pumps and also for stationary duties like manhole cover sealing. The technology has developed over a period of time. Orginally old ropes and natural fiber products were used for sealing … with varying degrees of success. The technology has now progressed to such an extent that now several combinations of artificial fibers and cutting edge materials are used, and gland packings are even used in harsh applications like nuclear environments and in the handling of corrosive products.

gland packing

Chain

Roller chain

Roller chain or bush roller chain is the type of chain drive most commonly used for transmission of mechanical power on many kinds of domestic, industrial and agricultural machinery, including conveyors, wire- and tube-drawing machines, printing presses, cars, motorcycles, and bicycles. It consists of a series of short cylindrical rollers held together by side links. It is driven by a toothed wheel called a sprocket. It is a simple, reliable, and efficient means of power transmission

BS (British Standard)
RS (American Standard)

bs chain

Black Steel

Made from quenched and tempered alloy steel. Only Grades 80 or 100 should be used for overhead lifting.

  • Overhead lifting
  • Tow & binder chain
  • Finish: painted, shot blast, self colored
black steel chain

Galvanised

Hot dipped galvanised chain offers a high degree of weather and corrosion protection. It is recommended for industrial, commercial or any environment where the aesthetic appearance is of less importance than weather protection.During the hot dip galvanising process, the chain is lowered into a galvanising bath which paints a deeper depth of galvanisation than conventional electro galvanising. The finished chain has a matt, slightly abrasive finish.

galvanised chain

Gasket

Plain Reinforced Pre-Cut

Gasket material selection is critical. To perform their function, gaskets are expected to be compressible and resilient. After all, the purpose of a gasket sealant is to compensate for the unconformity of mating surfaces (surface irregularities). These irregularities may be minute or large. The gasket material may need to limit the flow of gas or fluids through the irregularities. No matter what, gasket material is required to compensate for the difference. Gasket material suppliers need to have a wide selection of material. They also need to know how the material will perform in specific applications. Our wide inventory includes very thin paper gasket materials, heavy gauge rubber and everything in between.

plain gasket

Door Rubber

This comprehensive range of rubber door seals will stop draughts as efficiently as our draught strips and prevent water from entering where it is not wanted for left and right hand opening doors as well as hatches.

door rubber

Corroseal Tape

A synthetic carrier, with formulated refined petrolatum type compounds with inert siliceous fillers and inhibitors, which provides corrosion protection to steel piles and metals in submerged situations. Will not crack or harden and remains flexible.
TECHNICAL DATA TENSILE STRENGTH 215n / 50mm Width

corroseal tape

Ferrule

Ferrules & crimps for forming eyes & stops on stainless & galvanised wire rope and steel wire rope. Also known as wire rope sleeve, cable crimp & cable crimps. TALURIT aluminium, copper & stainless ferrules & crimping tools manufactured to the highest standard

ferrule

Wire Rope Grip

Wire rope grips (bulldog grips) require no special tools for assembly and can be disassembled and reused. Used to create eyes in cable constructions. Simply loop the cable each side of the threaded bolt and tighten down the plate using a suitable spanner.

wire rope grip

Grease Gun

A grease gun is a common workshop and garage tool used for lubrication. The purpose of the grease gun is to apply lubricant through an aperture to a specific point, usually on a grease fitting or ‘nipple’. The channels behind the grease nipple lead to where the lubrication is needed. The aperture may be of a type that fits closely with a receiving aperture on any number of mechanical devices. The close fitting of the apertures ensures that lubricant is applied only where needed

grease gun

Mechanical Seal

A mechanical seal is a device that helps join systems or mechanisms together by preventing leakage (e.g. in a plumbing system), containing pressure, or excluding contamination. The effectiveness of a seal is dependent on adhesion in the case of sealants and compression in the case of gaskets.

mechanical seal

Electric Motor – Single Phase / Three Phase

An electric motor is an electrical machine that converts electrical energy into mechanical energy. The reverse of this would be the conversion of mechanical energy into electrical energy and is done by an electric generator. In normal motoring mode, most electric motors operate through the interaction between an electric motor’s magnetic field and winding currents to generate force within the motor. In certain applications, such as in the transportation industry with traction motors, electric motors can operate in both motoring and generating or braking modes to also produce electrical energy from mechanical energy.

electric motor

Plastic Curtain

PVC Strip Curtains is useful for Hotels, Pharmacy Industries, Food Industries, Chemical Industries. For control the dust & import particles.
PVC Specifications:
* U V Stabilized
* Temp Range
* Chemical Resistance : High resistance to corrosive…

plastic curtain

Valves

Water Line
Sewerage Line
Flow Control

A valve is a device that regulates, directs or controls the flow of a fluid (gases, liquids, fluidized solids, or slurries) by opening, closing, or partially obstructing various passageways. Valves are technically valves fittings, but are usually discussed as a separate category. In an open valve, fluid flows in a direction from higher pressure to lower pressure. The word is derived from the Latin valva, the moving part of a door, in turn from volvere, to turn, roll.
The simplest, and very ancient, valve is simply a freely hinged flap which drops to obstruct fluid (gas or liquid) flow in one direction, but is pushed open by flow in the opposite direction. This is called a check valve, as it prevents or “checks” the flow in one direction.
Valves have many uses, including controlling water for Irrigation, industrial uses for controlling processes, residential uses such as on / off & pressure control to dish and clothes washers & taps in the home. Even aerosols have a tiny valve built in. Valves are also used in the military & transport sectors.
Valves are found in virtually every industrial process, including water & sewage processing, mining, power generation, processing of oil, gas & petroleum, food manufacturing, chemical & plastic manufacturing and many other fields.
People in developed nations use valves in their daily lives, including plumbing valves, such as taps for tap water, gas control valves on cookers, small valves fitted to washing machines and dishwashers, safety devices fitted to hot water systems, and poppet valves in car engines.
In nature there are valves, for example one-way valves in veins controlling the blood circulation, & heart valves controlling the flow of blood in the chambers of the heart and maintaining the correct pumping action.
Valves may be operated manually, either by a handle, lever, pedal or wheel. Valves may also be automatic, driven by changes in pressure, temperature, or flow. These changes may act upon a diaphragm or a piston which in turn activates the valve, examples of this type of valve found commonly are safety valves fitted to hot water systems or boilers.
More complex control systems using valves requiring automatic control based on an external input (i.e., regulating flow through a pipe to a changing set point) require an actuator. An actuator will stroke the valve depending on its input and set-up, allowing the valve to be positioned accurately, and allowing control over a variety of requirements.

valves

Rope Lagging

Our range of Fibreglass rope lagging is made with a texturised glass fibre core then finished with a fibreglass yarn braid on the outside. It is light weight, high in strength and has low thermal conductivity. Fibreglass ropes are used as an asbestos replacement. Applications include a range of sealing and heat insulation applications.

rope lagging

Rubber Insertion

Insertion rubber sheeting is manufactured from commercial rubber with single ply cloth reinforcement. This provides an increased tensile strength and tears resistance over standard commercial rubber sheeting.

rubber insertion

Sprockets

Chain sprockets for British Standard chain up to two inch pitch. Other sizes of sprocket, including those to American Standard dimensions, are available on request. Special sprockets are also manufactured on request, in special materials or formats, normally to suit a specific applications in harsh or difficult drive situations, such as;

  • Sprockets incorporating shafts
  • Welded or detachable hubs
  • Shear pin devices fitted
  • Necklace sprockets made up of chain plates and individual tooth sections for turning large drums or tables.
  • Combination sprockets (two or more sprockets combined having different pitch sizes and numbers of teeth).
  • Sprockets in two or more sections, i.e. split sprockets or segmental sprockets
sprocket

Thimbles

These wire rope thimbles are generally the standard for light duty rigging applications and are meant to extend the life of a wire rope.

thimble

Trefolex

Trefolex is a green coloured, active cutting compound containing a colloid. It melts slowly as frictional heat is generated. It maintains efficient lubrication throughout operations such as pipe screwing, hack sawing, tapping, reaming, etc. It is suitable for all users of hand tools. Trefolex prolongs the life of the tool. It will not corrode steel nor affect aluminium. Although the surface of copper and brass is darkened, the metal suffers no detrimental effect. It is ideal for use with stainless steel.

trefolex

Wire Rope – Steel / Galvanised

Wire rope consists of one or more numbers of strands, laid spirally around one core of steel or fibre core. Generally, most widely used ropes are of six strands. Wire rope consists of three basic components, while few in numbers, these vary in both complexity and configuration, which allow the production of rope for specific purposes or with specific characteristics

wire rope

Wire Rope Sling

We supply steel wire rope slings in the following configurations Single leg , Two leg , Four leg with mechanically spliced hard / soft eyes at both ends pressed with aluminium ferrules , Flemished spliced hard/ soft eyes pressed with steel ferrules .

wire rope sling